在线业务采集并显示过程值
传送过程值至控制室，传输信号为4 ... 20 mA、0 ... 20 mA和0 ... 10 V
本地模拟显示，易于读取且无需外部电源
*应用
功能特性
“即插即用”，无需配置
信号传输符合NAMUR标准
测量范围：0 ... 0.06 MPa 至 0 ... 160 MPa
易于读取的模拟显示，标准尺寸为100或160mm
符合标准EN 837-1*等级S3的压力表
Description
At any point where the process pressure has to be indicated
locally, and, at the same time, a signal is wanted to be
transmitted to a central controller or remote control room, the
model PGT23 intelliGAUGE (patent applied for, among others
European Patent No. EP 06113003) can be used.
Through the combination of a mechanical measuring system
and precise electronic signal processing, the process
pressure can be read securely, even if the power supply is
lost.
The intelliGAUGE model PGT23 fulfils all safety-related
requirements of the relevant standards and regulations for the
on-site display of the operating pressure of pressure vessels.
An additional measuring point for mechanical pressure
indication can thus be saved.
The model PGT23 is based upon a model 23x.30 high-quality,
stainless steel safety pressure gauge with a nominal size
of 100 or 160. The pressure gauge is manufactured in
accordance with EN 837-1.
